Wireless Mini WiFi Cameras HD 1080P Home Micro Camera Night Vision Motion Detection Video Recorder Camcorders

Features

1. Support automatic infrared night vision.

2. Support mobile monitoring APP notification.

3. Built-in 400 mAh battery, 1.5 hours long time use, can record while charging.

4. Support WiFi link remote monitoring.

5. Support SD card local storage and cloud storage.

Product Parameters

Material: ABS

Battery: 400 mAh

Charging time: 1 hour

Usage time: 1.5 hours

Pixel: 1 million

Operating system: Lite OS

Number of online users: 2 users watching online at the same time

Processor: BK7252

Image sensor: 1/4 inch CMOS sensor

Minimum illumination: 0.3~0.5Lux (color mode),0Lux (B&W mode)

: 0309 module

Viewable angle: ° diagonal

Night vision: automatic switching of the sensor, six 940nm SMD infrared light, irradiation distance of 3 ~ 5 meters

Compression standard: AVI

Multi-stream: 1080P@30fps+VGA@30fps+360P@4fps JPEG capture

Code rate: CBR / VBR two code rate control mode, and the output code rate range of 128 ~ 4096kbps

Image adjustment: brightness, contrast, saturation, chroma adjustable

Input: built-in -38dB microphone

Output: None

Sampling frequency / bit width: 8KHz / 16bit

Compression standard/code rate: ADPCM/32kbps

Network Protocol: TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,RTSP,P2P etc.

Wireless network: IEEE802.11b/g/n

Wireless frequency: 2.4~2.4835GHz

Wireless security encryption: 64/128-bit WEP/WPA-PSK/WPA2-PSK data encryption

Wireless connection: AP hotspot mode

Button 1: on/off

Button 2: Reset button

Storage function: Support T-Flash card (up to 64GB)

Alarm detection: Support motion detection

Rated voltage: DC5V±5%

Power consumption: working 155mA

Package List

Camera*1

Power cord*1

Stand*1

Instruction manual*1

Q&A

Q1: Why can't the camera format the memory card?

A1：First of all, please check whether the memory is inserted correctly, correct insertion will have the feeling of spring jamming; secondly, please load the memory card under the state of camera off, the memory card loaded under the state of power on will not be recognized; thirdly, under the state of power on, press and hold down the button next to the power on button for 5 seconds to reset and reset the camera.

Q2: Why does it ask me to enter the password when I connect the camera on the APP?

A2：When you connect the camera on APP for the first time, you are asked to fill in the password of the connected WiFi network, which is set by yourself. If you don't remember, you can reset the camera and connect it again.